Image Header Info

Call Us: +86 15051969118

E-mail:sale@itcpowerworld.com
Image Header Info

Mon - Fri 09:00 - 22:00

Sat - Sun 09:00 - 22:00

Blog

How does diesel generators work?

How does diesel generators work?

The diesel engine drives the generator to operate, converting the energy of the diesel into electrical energy. In the diesel generator cylinder, the clean air filtered by the air filter is fully mixed with the high-pressure atomized diesel sprayed from the fuel injector. ITCPower’s diesel generator is compressed by the upward piston, the volume is reduced, and the temperature rises rapidly. High, reaching the ignition point of diesel.

The diesel is ignited, the mixed gas burns violently, and its volume expands rapidly, pushing the piston down, which is called ‘work’. Each cylinder performs work in a certain sequence, and the thrust acting on the piston is transformed into the force that pushes the crankshaft to rotate through the connecting rod, thereby driving the crankshaft to rotate. Install the brushless synchronous alternator coaxially with the crankshaft of the diesel generator, and then the rotation of the diesel generator can be used to drive the rotor of the generator. Using the principle of “electromagnetic induction”, the generator will output induced electromotive force through a closed load circuit. Can produce electric current.

Diesel generator set is a type of AC power supply equipment of self-supplied power station. It is a small independent power generation equipment that uses an internal combustion engine as power to drive a synchronous alternator to generate electricity. The current diesel generator set is composed of diesel engine, three-phase AC brushless synchronous generator, control module, cooling water tank, coupling, fuel tank, muffler and common base and other components as a whole. The flywheel housing of the diesel engine and the front end cover of the generator are directly connected in the axial direction by a shoulder positioning, and a cylindrical elastic coupling is used to directly drive the rotation of the generator. The connection method is fixed by screws to make the two They are connected into a steel body to ensure that the concentricity of the crankshaft of the ITCPower diesel generator and the generator rotor is within the specified range.

In order to reduce the vibration of the unit, shock absorbers or rubber shock absorbers are usually installed at the joints between the main components such as diesel generators, alternators, water tanks, and electrical control boxes, and the public base.

The various uses of diesel generator sets are produced in response to different stages of social development. Among them, self-provided power supply and alternative power supply are due to the backward construction of power supply facilities or insufficient power supply capacity. They are the focus of market demand in the early stage of social and economic development. Backup power supply and mobile power supply are due to increased power supply guarantee requirements and power supply. The demand generated by the continuous expansion of the scope is the focus of market demand in the advanced stage of social and economic development. Therefore, if the market use of diesel generator sets is examined from the perspective of social development, it can be said that it is the self-provided power supply and the alternative power supply. Transitional use, and as a backup power supply and mobile power supply is its long-term use, especially fire-fighting power supply, as a huge potential market demand, will slowly be released.